here are some issues with the power manager in ubuntu and tablet. There was alarge discussion you can find here.

But basically to save power and time you should run without atime by following these commands

Make sure you have vim-full installed

sudo apt-get install vim-full

This is a powerful editor, the lite edition is confusing to some, ignore this if you would like to use gedit (think graphical editor) just replace `vi` with `gedit` in the commands Next,

sudo vi /etc/fstab

Find the line that looks like this, _ UUID=65d4f3af-6###-4767-b###-4aa28b61b### / ext3 defaults,errors=remount-ro 0 1 _ Do not copy my line, your likely to have issues if you do so. Make the line look like this by pressing `insert` and moving the pointer to the place and typing in the text, hit 'esc' and then 'shift + v' twice _ UUID=65d4f3af-6###-4767-b###-4aa28b61b### / ext3 defaults,errors=remount-ro,**noatime** 0 1 _ Restart your system or run this command

        sudo mount -o remount /

Most users of linux need not be concerned with updating Wacom. But there are many out there that should be. Namely, those that are using tablets or have a tablet PC. Wacom is probably the number one driver manager for tablet hardware in linux. Unfortunately, it’s a driver that too often gets fuddled with and not upgraded.

You can check your current version by running this command in a terminal (Applications->Accessories->Terminal)

dpkg -p wacom-tools  | grep Version

You should get an output of something like this

Version 1:08.1.4-0ubuntu3

If that has 08.2 instead of 08.1.##, then you can disregard updating (Understand that this post is from Dec 08, a new version can be found here when they come out).

To solve this, you should always keep your wacom updated to the newest version. As with this post, the newest version is 0.8.2 (The Linux Wacom Project). Intrepid Ibex, the current release of Ubuntu, ships with .8.1-4. .8.2 adds some new features, like better touch support. Users with an X61T like me would LOVE to have this back after frying Vista.

First thing you should do it download the newest version here - 0.8.2

**This is a pre-built binary. If this doesn’t work for you, you should read below.

Download the file to your Desktop and unpack it using the archive manager. You can delete these files when your finished.

Run these commands

cd Desktop/linuxwacom-0.8.1-6/prebuilt

sudo ./uninstall

sudo ./install

The last step is to press ‘ctrl + alt + backspace’ to restart your X11. This will log you out of X11, so make sure to save anything you have open.

For those users that are unable to follow these steps because of errors. You may need to compile the drivers on your own. You can find out the information on how to do that here.

Enjoy!

You can learn something everyday it seems.

Yesterday, I had some issues that I hadn’t planned on ever occurring with my local development server. Basically, the issue was discovered when my server suddenly did not have ANY access from the internet. Now, it DID have access to the internet, oddly enough, and I could reach it via hostname through my local network. The first issue I figured it would have been was a router problem. Namely port forwarding was getting messed up. My server is set statically on my network, so the port forwarding should be fine, and Remote Desktop to my XP machine works fine from the outside world. So the router is NOT the issue. Next step was DNS. Maybe my dns is messed up? I checked out my /etc/resolv.conf

> vi /etc/resolv.conf

nameserver 192.168.1.149
nameserver ###.###.###.###
I blocked out the ### because this is uneeded information about my ISP. Normally you want your name servers to be a nameserver, or your access to a name server. The first shows my router, from the inner network, which is what can be here. This explains why my hostname works via my network. But it is not the solution to my issue. So I dugg a bit deeper. What was that I said earlier? Ah yes, my server has a STATIC ip. Which means I should have a static route.
> ip route
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.129
default via 192.168.1.1 dev eth0 metric 100
OK! There is my issue! My static route is pointing by default to 192.168.1.1 which is NOT my router (192.168.1.149). So a quick update to that and that should fix it!
> vi /etc/network/interfaces

This file describes the network interfaces available on your system

and how to activate them. For more information, see interfaces(5).

The loopback network interface

auto lo
iface lo inet loopback

The primary network interface

auto eth0
iface eth0 inet static
address 192.168.1.129
netmask 255.255.255.0
network 192.168.1.0
gateway 192.168.1.149
I edited the line in bold. This was 192.168.1.1 and now it is 192.168.1.149
> /etc/init.d/networking restart
Now the networking is reset!
> ip route
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.129
default via 192.168.1.149 dev eth0 metric 100
default via 192.168.1.1 dev eth0 metric 100
And Wa-Laa! All done. Now I can access my server via the internet from anywhere as it should be always.

Lesson learned I guess. Hope this helps some others stump issues they are having with static networking on linux.